Injection molding cycle time by a mold, filling time, dwell time, cooling time and the release time components. Among them, the largest proportion of the cooling time, about 70% to 80%. Accordingly, the cooling time will directly affect the plastic molding cycle length and the volume of production. Plastic stripping stage should be cooled to a temperature below the thermal deformation temperature of the plastic products factory Fuyong plastic to prevent warping due to the slack plastic or lead to the release of residual stresses caused by external forces and deformation. Compression molding press molding press forming, also known as compression molding, compression molding, compression molding and other plastics factory in Bao'an, is the solid pellets or flakes added prefabricated mold, by heating and pressurizing method to softening and melting, and fill the cavity mold plastic factory in under pressure, after curing methods to obtain plastic parts. Press-molded thermoset plastic factory is mainly used, such as phenolic, epoxy, silicone, etc; also can be used to suppress the thermoplastic PTFE products and polyvinyl chloride (PVC) records. Compared to injection molding, press molding equipment, mold is simple and can produce large-scale products; but long production cycle, low efficiency, difficult to automate, difficult to produce thick-walled products and shape of complex products. Large plastic factory, integration into a plastic mold factory (certification), plastic factory by the Shenzhen Municipal harmony Technology Limited. Shenzhen harmony Technology Limited (www.rhctech.net) Guangdong Shenzhen, plastic products leader, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. The integration into a plastic mold factory leadership with the staff warmly welcome all inquiries negotiations to create harmony into a plastic mold manufacturers a better future.